9 9 Flu URINAL SCREENS WH-G — Wall Hung Government Screen WT — WEDGE TYPE* Panels shall be 20 gauge stainless steel or 20 gauge bonderized-galvenized steel as specified. Panels shall have a top and bottom cap. Front of panel shall have oval locking strip connected to top and bottom cap. Panel shall be insulated with a honeycomb core cemented to panel sheets. Surface of screen at wall shall be 5” wide and shall be mounted to wall with concealed anchorage and without any exposed fastenings. WT — Wedge Type PS — Post Supported FS — Floor Supported WH — Wall Hung FS — FLOOR SUPPORTED Panels shall be same construction as standard Flush Metal panels. Panel shall be attached to pilaster and wall with diecast chrome plated brackets. Pilaster shall be 1 1/4” thick made of bonderized-galvanized steel. Pilaster shall have a 3” high stainless steel cover shoe. WH — WALL HUNG Panels shall be same construction as standard Flush Metal panels. Panel shall be attached to wall with diecast chrome plated wall brackets. PS — POST SUPPORTED Same as Floor Supported except it is applicable for screens up to 26” deep and will have a 1 3/4” square aluminum supporting post. WH-G — WALL HUNG GOVERNMENT SCREEN* This type if screen is specified by the Corps of Engineers and General Services Administration. Panels shall be same construction as standard Flush Metal panels. Panels to have integrally formed mounting flanges. Screens available in baked enamel, stainless steel, plastic laminate and phenolic. *WT Screen and WH Government Screen not available in plastic laminate or phenolic. 9