8 Flu 8 Plastic Laminate DOOR & PANELS Door & Panels shall be constructed of a sandwich of laminated plastic bonded under pressure to a solid particleboard core with the highest quality adhesive assuring a rigid, permanent bond. Doors and Panels – Finish thickness 1”. PILASTERS The anchoring device shall consist of a leveling device fastened to bottom of pilaster and attached to the floor. Pilasters shall be constructed of a sandwich of laminated plastic bonded under pressure to a solid particleboard core. Pilaster shall be 1-1/4” thick. HARDWARE All hardware shall be heavy non-ferrous, chrome plated castings. Fastenings by means of thru- bolts with theft proof heads. Pilaster shoe shall be 4” high, of #302, 18-8 polished stainless steel. Includes all necessary hardware and fittings for a complete installation. Brass and stainless steel hardware available at additional cost. SURFACING All faces and edges shall be 1/16” general purpose laminated plastic. All in accordance with NEMA standards. FINISH Laminated plastic shall be as selected from Flush Metal’s standard plastic colors and patterns. COLOR As selected from color guide. Plastic laminate partition units are made of fine quality plastic surface material that is applied with adhesive. A wide range of designer colors is available to coordinate with modern or traditional interiors. • Finest quality lamination • Wide range of colors • Suited to many interior situations where color is critical Flushite partition with plastic laminate finish.