Flu 4 DOOR & PANELS Doors and Panels shall be 1” thick insulated with a sound deadening honeycomb core. Face plates shall be not less than 22 gauge bonderized galvanized steel and shall have a molding interlocking all edges. Door edges shall be welded at intervals around perimeter to insure a rigid unit. Corners shall be welded and ground smooth. Panels available in 20 gauge. PILASTERS Pilasters shall be 1-1/4” constructed of 18 gauge bonderized-galvanized steel insulated with a sound deadening honeycomb core. Edges shall be welded at intervals around perimeter to insure a rigid unit. Edges to be interlocked with oval molding, corners to be welded and ground smooth. Pilasters to be fastened to structural members with 3/8” cadmium plated rods. Template to be supplied by manufacturer for drilling of structural members. HARDWARE Compartment is to be complete with all hardware and fastenings for a complete installation. Hardware to include wrap-around door hinges, latch, stop and keeper and coat hook. Lower hinge to be recessed in the door and shall operate on opposing nylon cams. Upper hinge to be recessed in the door and shall operate on a pin anchored above and below the hinge bracket. Latch to be concealed type with emergency access features. All hardware to be Zamac chrome plated. FITTINGS Wall and “U” brackets to be chrome plated. Door strikes and hinges to be fastened by means of 6 lobe security pin T27 chrome plated tamper proof thru-bolts. All pilasters to have a 3” high stainless steel shoe. Aluminum and stainless steel hardware available at additional cost. FINISH Partitions shall be cleaned and finish shall consist of highest quality powder coating baked at 350° F to insure a smooth protective finish. COLOR As selected from color guide. Flush Metal Powder Coated partitions are finished with a powder coating in the color you select. After the powder is applied to the partition using an electro-static spray process, the part passes through an oven and cures, melting the powder into a smooth film on the surface of the partition. Powder is 100% solid and contains no solvent; therefore, it is an attractive choice over liquid finishing. Powder coatings permit compliance with volatile organic compound standards and offer a stronger film than most liquid finishes. Flushung parition with powder coated finish. Powder Coated