3 3 Stainless Steel DOOR & PANELS Door & Panels shall be 1” thick insulated with a honeycomb core. Face plates shall be not less than 22 gauge stainless steel and shall have a molding interlocking all edges. Door edges shall be welded at intervals around perimeter to insure a rigid unit. Corners shall be welded and ground smooth. Panels available in 20 gauge. PILASTERS Pilasters shall be 1-1/4” constructed of 20 gauge bonderized-galvanized steel insulated with a sound deadening honeycomb core. Edges shall be welded at intervals around perimeter to insure a rigid unit. Edges to be interlocked with oval molding. Pilaster when set in place shall be securely braced with a continuous 1” x 1-1/2” tube of extruded alloy, polished and anodized. Pilaster shall be attached to the floor by means of an anchoring device and secured with (2) 1-1/2” long screws and shields. HARDWARE Compartment is to be complete with all hardware and fastenings for a complete installation. Hardware to include wrap-around door hinges, latch, stop and keeper and coat hook. Lower hinge to be recessed in the door and shall operate on opposing nylon cams. Upper hinge shall operate on a pin anchored above and below the hinge bracket. Latch to be concealed type with emergency access features. All hardware to be Zamac chrome plated. FITTINGS Wall and “U” brackets to be chrome plated. Door strikes and hinges to be fastened by means of 6 lobe security pin T27 chrome plated tamper proof thru-bolts. All pilasters to have a 3” high stainless steel shoe. Aluminum and stainless steel hardware available at additional cost. FINISH All stainless steel units shall be #4 finish and shall be vinyl covered for protection during shipment and installation. Also available in textured stainless steel. COLOR Finish shall be #304 stainless steel, #4 finish. Flush Metal Stainless Steel partition units not only have a lustrous, quality appearance, but are extremely durable. Pilaster, door, and partition panels can be cleaned and maintained with great ease and are recommended for areas of high humidity. Flush Metal textured stainless steel partitions provide the maximum protection against graffiti and physical abuse. • Lustrous high quality appearance • Extremely durable • Increased ease in maintenance and cleaning • Recommended for areas of high humidity Flushite partition with stainless steel finish